LED Control Module with Audio Interface

After what seemed like an eternity in R&D the Whoolie Shop is proud to announce our LED Control Module is here! Previously this module was called a "strobe" module but with the multitude of features our new module offers we've decided that the term LED Control Module is more accurate..

NOTE: These modules are very new, thus we have limited quantities on hand at the moment. Please contact us before ordering if the possibility of having to wait a week or so is an issue!!

When we started development of this module the whole purpose was to create a control module that would withstand the extreme environments that we subject our ATV's and UTV's to every ride.. No matter if you're riding in the snow or handlebar deep water or completely buried in the mud this module is designed to survive. Thus our module is completely waterproof, splash proof, submersible and every bit as tough as you've come to expect from our products.

The WS002 LED Control Module isn't just some run of the mill black box that flashes lights on some mediocre patterns. Not a chance, the strobe module features 4 main modes of operation, with up to 10 sub-modes to further configure your effects. All in all 33 different features/color variations which completely blows away the old module.

LED Control Module Submersion Test

The LED Control Module also offers support for three independent colors, and your main color (zone 1) can be broken down into six separate channels.

This means in Strobe Mode: (10 Patterns)
*Chase patterns, revolving around your ride
*Wig-Wag/Alternate patterns, Front to rear alternation or left to right
*Every Other pattern, Every other light illuminating in sequence
*Multi Zone Strobe - strobe each zone one after the other
*Individual zone strobe - select a single zone (color) for strobing.
*Random Strobe - let the module decide which pattern or effect as it cycles through the available options

Past this the strobe effects begin to combine the different zones together mixing the colors to create new colors.

Solid Color Functions Up to (7 Variations)
The Whoolie Shop LED Control Module also offers static color selection, thus you can pick from any of the three installed zones or combine them for completely new colors

Fade Away (2 speeds) Up to 7 Variations
Fade between the different installed colors on your ride, as well as change the speed of the fade. This feature mixes the colors together creating colors in between the primary 3
The fade pattern goes as follows:
Zone 1 -> Zone 2 -> Zone 3 -> Zone 1 & Zone 2 -> Zone 2 & Zone 3 -> Zone 1 & Zone 3 -> All Zones -> Repeat (Speed either fast or slow)

Static Zone
If you've got some LEDs that you don't want to be included in the fade/strobe/music process we've provided a static zone that comes on when any other mode of the module is active. Thus if you've got a radiator kit installed there's no need to have it wired separately if you wish to keep it lit up solid.

Optional Music Interface Mode
The strobe module is offered both with and without the musical interface module. We offer it both with and without for those users who may not have a sound system on their ride or don't need music integration. The module without this extra circuitry saves us time building them and components thus it's a few bucks cheaper.
If you *do* have a stereo system the strobe module will plug in to a 3.5 mm jack (you'll need a splitter) and the module will analyze whatever music you're currently jamming to, split it apart and cause your under-body lights to react to the music. It produce some really cool effects blending the three zones at various rates in time with your music. Click here for the module without the audio interface.

Audio Interface Accessories The following items can be added to your module to save you the trouble of going out and finding them locally.. These items are priced separately as not everyone has the exact same configuration *3.5mm Y cable - (1 male 2 female)
If you are using a 3.5 mm patch cable from your phone/mp3 source you'll need one of these to use the audio module with your stereo setup. Simply plug this into your ride's 3.5mm input then patch in your music source to one side and the LED control module to the other.

*3.5mm extension cable - (1 male 1 female x 6ft)
Depending on where you mount your LED Control module you may need this cable to extend the audio module's 3.5mm input.

Available Options:

Select Configuration::


Quick Find

Use keywords to find the product you are looking for.
Advanced Search